News products

Concentric High Power cables for DC fast charging systems. BETAjet® 270 high flex

A cable which meets high DC current capacity, important safety performance, has zero magnetic field outside and provides simple air cooling. This is the BETAjet® 270 high flex. Because this cable is originally developed as a jet cable for military aircrafts it meets the highest standards and is very compact at the same time. Due to the optimised diameter the cable is also very flexible.
Compared to liquid cooled cables the conductor size is higher, but this enables a low heat inertia and reduces the system costs dramatically, because there is no need for additional equipment like tubes, pumps, liquids and surveillance electronics. In addition there is no maintenance necessary for non-existing parts.
The main advantage of the CooFi cable is that the heat transfer to contact surfaces or skin is decreased. The temperature of the conductor may rise 10°C higher than in a standard cable. This enables this cable to transmit 10% – 14% more power compared to cables with the same conductor size without CooFi outer sheath.
Geplaatst in News products | Reacties uitgeschakeld voor Concentric High Power cables for DC fast charging systems. BETAjet® 270 high flex

Cat.7 Ethernet cable with a small outer diameter for residential applications

FELTEN Wire & Cable Solutions presents the LEONI MegaLine® Slim 600 data cable. This Ethernet cable distinguishes itself from other MegaLine® cables due to its small outer diameter (±5,7mm). Because of this diameter it is possible to apply two cables inside one tube. With the Cat.7 and CPR Dca classification this cable is ideal for application in residences. This cable is also very effective for multimedia applications, VoIP, PoE/PoE+ and cable sharing.
Geplaatst in News products | Reacties uitgeschakeld voor Cat.7 Ethernet cable with a small outer diameter for residential applications

KNX cables with CPR or for direct burial applications

The KNX-protocol is the global standard for building automation. The possibilities are almost endless, e.g. for applications with lighting, shades, audio, video, central heating, security systems, smart energy meters and kitchen devices.
For KNX(EIB) cables FELTEN Wire & Cable Solutions offers a variety of cables that are applicable for different situations. For outdoor applications we have a special designed KNX cable with a thick PE outer sheath. This outer sheath makes it possible to use this cable in direct burial situations.
For home and in-building applications there are KNX(EIB) cables with FRNC outer sheath and CPR classification. For the standard home and building applications there is a KNX cable with CPR Dca classification. When this fire-classification is not enough for the application we also have a version with the CPR B2ca classification. So the KNX(EIB) cables can be used in even the safest public areas.
Interested in the KNX(EIB) cables FELTEN Wire & Cable Solutions offers?
Contact us on: Sales@feltenwcs.com
Geplaatst in News products | Reacties uitgeschakeld voor KNX cables with CPR or for direct burial applications

Reduced biofouling in underwater environments

Biofouling is one of the biggest problems in long-term exposure of underwater cables as this process starts within a few hours. The cables will increase in diameter and weight because of the growth of marine plants and animals like polyps, mussels, starfishes or algae.
LEONI has developed a new sheathing material for underwater cables which reduces the settlement and growing process mainly of first micro-organisms. The main advantage of the material is the implementation of lightly acid surrounding along the cable surface and therefore a long-time effect.
The effect was shown during several 6-month storage tests of cables with different sheathing material surface variations in the Baltic Sea.
It is now possible to implement the new developed material in all types of polyurethane based sheathing materials. The material is resistant against sea water and also fresh water. It is suitable for fixed installed and also flexible cables. The material can be used for single layer and also for outer layer in multilayer sheath design.
Geplaatst in News products | Reacties uitgeschakeld voor Reduced biofouling in underwater environments

BETAflam® Solar cables for the transmission of clean energy

Whether it is an off-grid application or a grid connected PV-System, the cables from LEONI meet the same high expectations that are demanded from the solar modules. These demands are a long service life and high weather resistance.
The double insulated, electron-beam cross-linked H1Z2Z2-K cables meet the highest requirements for solar cables in the most important photovoltaic markets of Europe and the USA and can be used unrestrictedly as a module cable or connecting cable.
These products have TUV and EN50618 approval for the European market and UL approval according to the latest NEC specifications (National Electric Code 2008 / UL Outline 4703).
For the bigger cross-sections LEONI has the SOLARpower installation cables with aluminium conductors which are a cost effective solution and have a reduced weight.
Geplaatst in News products | Reacties uitgeschakeld voor BETAflam® Solar cables for the transmission of clean energy

Fieldlink® KNX (EIB) cable with the highest fire classifications: CPR B2ca & IEC 30332-3-22 Cat. A.

After an intensive period of product development, factory inspections and fire tests the FieldLink® family is extended with a KNX (EIB) bus cable that meets the highest fire classifications for use in buildings (CPR B2ca) and marine applications (IEC 60332-3-22 Cat. A).
The Fieldlink® KNX cable was already certified for vertical fire propagation during fire for a single isolated cable. With the IEC 60332-3-22, the vertical fire propagation during fire for vertical installed bundled cables is tested. Due to this certificate, this KNX cable can be used in ships, yachts, buildings and industry. In buildings (and yachts), this cable can be used to create smart homes with home automation systems such as domotics. To meet the high demanding needs in the marine and industry markets this certificate is acquired as an extension for the CPR B2ca classification.
This KNX bus cable is widely deployable and deliverable from stock.
Geplaatst in News products | Reacties uitgeschakeld voor Fieldlink® KNX (EIB) cable with the highest fire classifications: CPR B2ca & IEC 30332-3-22 Cat. A.

Fire-resistant cables with new CPR approval Cca for FiberConnect U-DQ(ZN)H(SR)H with corrugated steel tape

Universal optical fiber cable now available, transversely/longitudinally watertight, effective rodent protection, gel-filled loose tubes, UV-stable with CPR approval plus Cca declaration of performance

Cables meeting the Cca fire class are now recommended by more and more associations as a minimum requirement for various designs. As part of the continuous expansion of our portfolio of fire-resistant cables we have had another FiberConnect cable type qualified for permanent installation in buildings. As a result, we can now offer you a metal-sheathed universal cable with the corresponding approval.

Legal requirements respective cabling in data communications and networks, and structured cabling for office and data center environments in particular, are frequently amended to become ever-more demanding. In turn, the relevant industry associations regularly update their recommendations for the fire-resistant cables to be installed in various parts of the building. In addition to standard cables corresponding to the new fire classes Dca and Eca, we can also supply cables meeting the B2ca fire class. To ensure you can maintain the recommended minimum requirements for safety-relevant areas.

Geplaatst in News products | Reacties uitgeschakeld voor Fire-resistant cables with new CPR approval Cca for FiberConnect U-DQ(ZN)H(SR)H with corrugated steel tape

Ethernet cable with proven function integrity during and after fire for utility, marine and offshore applications, deliverable from stock.

To stay ahead of the increasing demands for data-cables FELTEN Wire & Cable Solutions BV now offers a new multifunctional LEONI Cat 6A Ethernet cable for buildings and offshore applications. This cable design already existed for marine and offshore applications including DNV-GL certification. In buildings the demands for data- and functional integrity are increasing. To emphasize the functional integrity this cable is produced with a red outer sheath. During and after a fire the Cat 6A specification will be guaranteed. This Ethernet cable is tested according the EN50200 (PH120) fire test, which demonstrates the signal integrity during a fire. The reason this cable is unique is because, after the EN50200 fire test, the cable was tested again, according the IEC 61156-5. This makes this Ethernet cable suitable for fire alarm systems, applications in medical environments and other applications where high quality and reliable connections are necessary, also under extreme conditions.

This multifunctional Ethernet cable is now available from stock, straight from our warehouse located in Veldhoven, The Netherlands.
Are you interested in this cable or do you have other cable needs?
Please do not hesitate to contact us.

Geplaatst in News products | Reacties uitgeschakeld voor Ethernet cable with proven function integrity during and after fire for utility, marine and offshore applications, deliverable from stock.